INDUSTRIAL GREASES
Meets specifications:
LITHIUM soap based grease of NLGI 0 consistency. Product is fortified with antioxidants and EP additives
Application areas:
Recommended for lubrication requirements where NLGI 0 grade is recommended with EP properties. Product has good pumpability.
Special Features
LITHON EP series of lubricants are first quality, lithium soap greases suitable for lubricating various types of mechanical equipments. These are superior multipurpose greases, developed to meet the varied requirements of bearing manufacturers. They are water-resistant and are corrosion inhibited with excellent oxidation and mechanical stability.
Physico-chemical properties
| LITHON EP 0 | |
|---|---|
| Appearance | Smooth And Uniform |
| Consistency of The Grease | 355 – 385 |
| @ 25± 0.5 ºC, 0.1 mm Units Worked, 60 X | |
| Corrosion, Copper Strip, @ 100ºC For 24 Hours | Negative |
| Dropping Point, ºC | >180 |
| Four Ball Weld Load, kg, Min | 200 |
| Four Ball Wear Scar Dia, Max | 0.50 |
| Emc or Rust Test, Rating | 0, 0 |
| Timken ok Load, lb, min | 45 |
| Oxidation Stability @ 99± 0.5 ºC For 100 hrs | 0.5 |
| Drop In Pressure, kgf/cm2 |
LITHON EP 00 | |
|---|---|
| NLGI Grade | NLGI00 |
| Appearance | Smooth & Uniform |
| Colour | Amber to light brown |
| Worked penetration at 25ºC± 0.5ºC | |
| a) 60 double stroke | 400-430 |
| b) After 100,000 strokes | Shall not difer by more than 30 units from the values given above |
| Free organic acidity (as oleic acid), % by mass, max | Value to be reported |
| Free alkalinity (as LiOH) % by mass, max | Value to be reported. Preferred < 0.1 |
| Drop point, ºC, min | 160 |
| Mineral oil extracted from the grease | |
| a) Kinematic viscosity in cst at 40ºC | 135-165 |
| b) Flash point ºC(COC), min | 200 |
| c) Viscosity Index, min | 60 |
| Cu strip corrosion at 100ºC, for 24 hrs | Negative |
| Oxidation stability (100 HOURS), drop in pressure Kg/sq cm, max | 0.7 |
| Freedom from deleterious particles, permitted , No. of scratches, max | 10 |
| Timken OK load, kg, min | 22 |
| Four ball wear test, scar dia, mm, max | 0.6 |
| Four ball weld test, weld load, kg, min | 250 |