NEAT CUTTING FLUIDS
HP KOOLKUT 40
HP KOOLKUT 60
HP KOOLKUT 70
HP KOOLKUT 80
HP KOOLKUT EP 66
HP TRIMOFIN 12
HP TRIMOFIN 14, 15, 16, 18
SYNTHKOOL 100, 101, 102
HP TRIMOFIN 19
TRIMOFIN 20
TRIMOFIN 21
TRIMOFIN 22
TRIMOFIN 23, TRIMOFIN 25
TRIMOFIN 26
TRIMOFIN 27
TRIMOFIN 54
TRIMOFIN 55
TRIMOFIN 56
TRIMOFIN 58
TRIMOFIN 64, 65 ,66
TRIMOFIN AL
TRIMOFIN GR
TRIMOL 225
Application areas:
These oils are suitable for machining nonferrous metals and light machining and free cutting of steels. Trimofin 14 & 15 are light coloured low viscosity oils recommended for machining of all metals except titanium. These oils are specially designed for honing applications. Trimofin 16 & 18 have higher viscosity and superior wettability. Trimofin 18 is acceptable for drawing of non-ferrous rods and tubing as well.
Detail Description
Oiliness type straight cutting oils. Blends of refined mineral oils and additives improve wetting characteristics. These oils are of non-staining type.
Performance benefits:
- Excellent cooling
- Excellent chip flushing properties
- High wettability to provide maximum lubricity
- Increased tool life
Meets specifications:
Trimofin 18 meets IS 3065 type 1 grade 2
Physico-chemical properties
| PROPERTIES | TYPICAL VALUES | |||
| TRIMOFIN 14 | TRIMOFIN 15 | TRIMOFIN 16 | TRIMOFIN 18 | |
| Kinematic Viscosity, cSt @ 40°C | 2.2 – 8.4 | 3.0 – 9.0 | 20.1 – 24.8 | 20.1- 24.8 |
| Flash Point, (COC) , °C, Min Copper Strip Corrosion 3 Hr @ | 110 | 110 | 160 | 150 (PMCC) |
| 100°C, (ASTM), Max | ||||
| Saponification Number mg KOH/gm | 6.0 – 8.5 | 6.0 – 8.5 | 9.0 -10.5 | 18 – 21 |
| Acidity Organic, mg KOH /gm Oil, Max | – | – | 0.1 | 0.2 |